Welcome to Zhengzhou Haloong Machinery Manufacturing Co., Ltd Website! Collect this site SITEMAP Contact US
1000 ton servo screw press

1000 ton servo screw press

Haloong electric screw press, driven by servo motor, is a new type of low energy consumption, environmentally friendly precision forging press, in response to the global carbon neutral program.

Advantages of Haloong servo electric screw press

product features
  • 1.precision control, quick response

    1.precision control, quick response

    The pressure can be exactly set in advance, every process can be made repeatedly andprecisely, which ensure the products to be homogenized. Servo motor is direct drive withoutclutch, so it can response quickly.

  • 2.Reasonable structure, homogenized products

    2.Reasonable structure, homogenized products

    Due to reasonable design of structure, can" t worry about the overload caused by oversizeor uneven heating, and slip jam (or seizure caused by overload). While for the same material,the different repeated pressures can be used to make it gradually deformed and successivelyforged.

  • 3.Quick forming, extend die' s lifetime

    3. Quick forming, extend die' s lifetime

    The speed of slide block will be very quick when it nears to the bottom dead point, so the timeis very short to forming the material, and the forged parts can be completed before it becomescool. In general, for hot forge, theshorter time of forging, the longer lifetime of die.

  • 4.Simple structure, cheaper maintenance

    4.Simple structure, cheaper maintenance

    The servo motor is direct drive, and it has simple structure and less components, so itsmaintenance cost is very cheap. For normal operation, there is no need for other brakes, theservo motor itself can make slide block to stop. The mechanical brake is only for the secondprotection when power off, so the lifetime of brake is extremely long.

  • 5.Process controlled as planned, wide application range

    5.Process controlled as planned, wide application range

    According to set pressure energy, the servo press can make slide block fall down acceleratedly first, thenslow down the slide block, and press the forged parts with set energy . Also,the press with bigger tons can forgesmall parts, one stroke time is lil change.

  • 6.High efficiency, reduce the production cost.

    6.High efficiency, reduce the production cost.

    The servo motor runs only at forming process, but the friction motor need run continuously. Compared withfriction press, the servo press can save 55% energy.

  • 7.Stamp forming, high energy

    7.Stamp forming, high energy

    The pressurization is the same as that of friction press, the servo press is instant shock pressurized, thepressure energy is very high. For the same forge, the crank press with 1.3- ·1.8 times nominal pressure shouldbe used.

  • 8.Lower noise and vibration

    8.Lower noise and vibration

    Compare with impact hammer, the pressure of servo press produces inside of the frame, there is no excessive vibration to the ground, so the cost of foundation is cheaper. The noise and vibration of servo pressare far less than those of impact hammer.

1000 ton servo  electric screw press parameters

Model Nominal Pressure
Permissible Capacity
Kinetic Energy
Stroke Length
Stroke No.s
(per minute)
Min Shut Height
Worktable Plate Thickness
Worktable Size FB*LR
HLDS-1000F 10000 16000 150 550 20 700 180 1000*900 134*2

Parameter changes due to technical upgrades will not be notified


NEWS14965 days that Haloong is with you

  • Haloong's high-precision forging screw press makes forging easier!

    Haloong's high-p...

    Forging screw press is a kind of forging equipment with strong process applicability. The forging screw press adopts servo control, simple structure, ... ...

  • Haloong Servo Forging Screw Press: Forging Hope, Manufacturing Future

    Haloong Servo Fo...

    Haloong's servo forging screw presses have always been welcomed by the forging industry due to their superior performance. The intelligent revolution ... ...

  • Servo hot forging press creates precision forging era

    Servo hot forgin...

    Why use servo press to create the era of precision forging? Because the development of high-end manufacturing industries, such as aerospace and milita... ...