Welcome to Zhengzhou Haloong Machinery Manufacturing Co., Ltd Website! Collect this site SITEMAP Contact US
315ton friction forging press updated to electric screw forging press

This video shows a forging customer site from Xuchang ,The forging press machine is 315ton.Haloong forging press machine can realize hot die forging,the auto parts hot die forging is free for our forging press machine.

Haloong forging press machine has the features as follows:1,precision control,quick response;Haloong forging press machine can set the pressure in advance,every process can be made repeatedly and precisely,which encure the products to be homogenized.Haloong forging press drove by the servo motor,which can response quickly.

2,Reasonable structure,homogenized products:The forging press machine has reasonable design of structure,no need to worry about the overload caused by oversize or uneven heating.

3,Quick forming,extend die's lifetime:The speed of slide block will be very quick when it nears to the bottom dead point,so the time is very short to forming the material,and the forged parts can be completed before it becomes cool.

4,Simple structure,cheaper maintenance:The servo motor is direct drive has simple structure and less components,so its maintenance cost is very cheap.

5,Process controlled as planned,wide application range:According to the set pressure energy,the forging press can make slide fall down acceleratedly first,then slow down the slide block,and press the forged parts with set energy.The forging press with bigger tons can forge small forgings,one stroke time is little change.The bigger forging press can be used to instead of smaller forging press,and the bigger one can yield twice the result than that of smaller ones.

6,High efficiency,reduce the production cost:The servo motor runs only at forming process,but the friction motor need run continuously.Compared with friction press,the servo forging press machine can save 55% energy.

7,Stamp forming,high energy.

8,Lower noise and vibration:Compare with impact hammer,the pressure of servo forging press produces inside of the frame,there is no excessive vibration to the ground,so the cost of foundation is cheaper.The noise and vibration of servo press are far less than those of ompact hammer.

9,High automation,unmanned production :The automatic production line is available,and the whole automatic process do not need the skilled workers.