In the cold winter, it is time to give our servo forging press a warm maintenance tour. In this season, the engineers of Zhengzhou Hualong Machinery pay special attention to the operation of the equipment, because they know that only after careful maintenance, the servo forging press can play the best performance in the cold winter.

First, warm check before starting

Before starting the servo forging press, first check the oil pool, oil level and oil mark. They ensure that the amount of oil in the pool is sufficient, the oil level is moderate, and the oil label is clearly visible. If the oil level is found to be too low or too high, they will fill the oil or adjust the oil level in time. At the same time, they also checked whether the button is flexible, whether the motor grounding wire is tight, and whether the safety protection device is intact. These seemingly small details are the key to ensuring the normal operation of the equipment.

2. Careful care in operation

After starting the hydraulic pump, pay close attention to the working state of the hydraulic pump. They check the sealing parts and pipelines for blockage and leakage to ensure the normal operation of the hydraulic system. At the same time, they also pay attention to the temperature rise and sound conditions of each moving part. If an abnormal temperature rise or sound is found, they will immediately stop to check and deal with the problem.

Third, the warm care at the end

After the end of the work, the servo forging press for a comprehensive inspection and maintenance. They clean all moving parts and make sure the equipment is clean and tidy. At the same time, they will also put each control handle in neutral (zero) to prevent damage to the device caused by miscontact. Finally, they will inspect, clean, and organize the work surface and work area to ensure that the working environment is clean and orderly.

In this cold winter, various forging plants pay attention to the strange sound made by the equipment, check the abnormal temperature rise and the leaking pipeline to find the problem and deal with it in time. Long-term maintenance records are maintained by recording answers after daily inspection. Such professionalism and meticulous working attitude ensure that the servo forging press can also play the best performance in the winter.