Welcome to Zhengzhou Haloong Machinery Manufacturing Co., Ltd Website! Collect this site SITEMAP Contact US
CURRENT LOCATION: Home > NEWS > FAQ >
What are the operating rules of the friction forging press ?

  For customers using the  friction forging press, the first thing to do is to be familiar with the operating procedures of the friction forging press, and understand the operating methods of the  friction forging press, so as to standardize the later operation, so as to avoid all kinds of accidents caused by misoperation.  So what are the operating procedures of press?  Zhengzhou Haloong Machinery Manufacturer Co, Ltd is a professional engaged in electric screw press, numercial control press, brick press and other production lines of manufacturers, Haloong for you to explain the operation of the  friction forging press:

1. The operator of the machine should be trained and familiar with the structure, performance and safe operation of the machine.  

 

2.Add lubricating oil according to the requirements of the lubrication table, and check whether the work of the power supply system and mechanical system is safe and reliable.  Before work, fuel the machine equipment and test the friction forging press. After confirming that everything is normal, wear labor protection articles according to the provisions of the labor department before starting the production, all production parts and materials should be stacked neatly, and keep a certain distance from the machine, electrical control box and fire facilities according to the provisions.  


3. After starting the machine, check whether the rotation direction of the big gear conforms to the direction indicated by the arrow, and run for 2-3 minutes in the air before operation.  


4.During the operation of the equipment, we should pay close attention to the flexibility and reliability of the running parts of the machine and the brakes, as well as the good condition of the tooling fixtures. If any fault is found, we must immediately cut off the power supply of the  friction forging press, stop the machine for inspection or notify the relevant departments for repair, find out the cause, and then use it after troubleshooting.  

friction forging press


 5. in the production process, the operator should concentrate, do not chat with others, pay special attention to their own safety, equipment operation process are not allowed to put any part of the body into the relevant danger area.

  

6. The power supply of the friction forging press must be cut off when off duty and the equipment and the surrounding site must be cleaned.  

 

The above is the operation rules of Haloong  friction forging press, please pay attention to production safety and remember the importance of safe production.  


 

News